The most effective method to Fix Print Head Problems in HP OfficeJet Pro 8000 Printers

The most effective method to Fix Print Head Problems in HP OfficeJet Pro 8000 Printers

The HP OfficeJet Pro 8000 Printer Series is comprised of OfficeJet Pro 8000, OfficeJet Pro 8000 Wireless and OfficeJet Pro 8500. These printers utilize a similar substitution ink cartridges, the HP 940XL ink cartridges: HP C4906AN dark ink, HP C4907AN cyan ink, HP C4908AN yellow ink and HP C4909AN maroon ink. This arrangement of inks has printing page limits of up to 2,200 pages for highly contrasting printouts and 1,400 pages for hued printouts.

For the present article, we will give an aggregation of answers for a standout amongst the most widely recognized issues looked by HP OfficeJet Pro 8000 printer clients and that is with respect to how to settle the "Printhead Problem" mistake message showing on their PC. The following are four investigating ventures on how you can settle this issue without anyone else. The accompanying arrangements are from HP Support Center:

HP Printer Support +1-877-353-1149 Phone Number for Instant Support

Issue: A show blunder message expressing "PrintHead Problem" will show on your PC or the printhead lights will squint. Printer won't do any printing occupations.

The standard reason for this issue is for the most part the ink cartridge isn't introduced appropriately, the ink cartridge is flawed or the printer needs some cleaning. To tackle this issue, allude to the accompanying arrangements beneath.

Arrangement 1 – Perform a Power Reset

1.            Press the Power catch of the HP OfficeJet Pro 8000 Printer to turn of the item.

2.            Disconnect the power rope of from the back of the printer.

3.            Then disengage the power string from the electrical outlet.

4.            Wait for 30 seconds.

5.            Then reconnect the power rope to the electrical outlet.

6.            Next, reconnect the power rope to the back of the printer.

7.            And ultimately, turn on the Power catch of your printer.

Arrangement 2 – Clean the Electrical Contacts

1.            Clean the contacts on the print head. To do this, turn on the printer and open the best cover at that point press and hold the OK catch for five seconds.

2.            Wait for the cartridge carriage to move to one side of the item. At the point when that happens, discharge the OK catch and hold up until the point that the cartridge carriage is still at that point unplug the power string from its electrical outlet.

3.            After that, lift the printhead hook at that point lift the idea about the printhead that the mistake message shows is absent or harmed, at that point haul the printhead out of its space.

4.            Use a dry, delicate and build up free material to expel any ink from the electric contacts on the print head. Make a point to wipe the electric contact (1) with the swab until the point when no ink buildup remains and wipe it with a new fabric to dry them and expel build up.

5.            When the printhead is perfect, put them on a sheet of paper or paper towel. Simply ensure that the ink spouts look up and don't contact the paper.

6.            While sitting tight for the printhead to become scarce, begin cleaning the electric contacts inside the item. Utilize a dry and delicate, build up free fabrics to clean the electric contacts at that point sit tight for five minutes for it to dry. Check if there is any build up then clean it again if necessary.

7.            Lastly, restart the item. Connect the power rope to its electrical outlet at that point press the power catch. Continue to embed the printhead into its shading coded opening at that point squeeze it down immovably until the point that its reaches the electric contacts inside the printer. From that point onward, pull the printhead lock the distance forward and push down to connect with the hook. On the off chance that any mistake message happens, continue cleaning the printhead and the electric contacts. In conclusion, close the front of the HP OfficeJet Pro 8000.

HP Printer Support +1-877-353-1149 Phone Number for Instant Support

Arrangement 3 – Replace the Printhead

1.            Press the power catch of your HP OfficeJet Pro 8000. At that point open the best front of the item.

2.            Press and hold the OK catch for five seconds until the point that the cartridge carriage moves to one side of the printer at that point discharge the OK catch.

3.            Wait till the carriage is still at that point lift the printhead hook.

4.            Then lift the idea about the printhead you are supplanting at that point haul the printhead out of its opening.

5.            Shake the new printhead bundle six times at that point expel the new printhead from the bundle. After that expel the defensive tops from the printhead.

6.            After that, embed the printhead into its particular shading coded space. Keep in mind that the name on the printhead must match on the printhead lock. Press it down immovably until the point that it reaches the electric contacts.

7.            Pull the printhead hook the distance forward then press down the lock solidly to connect with the hook.

8.            If there are any blunder messages, have a go at putting the new printhead once more.

9.            Lastly, shut the front of the item at that point restart and endeavor to print an arrangement page.

HP Printer Support +1-877-353-1149 Phone Number for Instant Support